TV Mounts / Mounting Dream
Mounting Dream MD2268-LK Tilting Mount
The slimmest tilting mount here at 1.5 inches — but only 8 degrees of tilt.
Overall score 6.8/10
Pros
- + 1.5 inches from the wall is the slimmest tilting profile here
- + 132lb and VESA 600x400 at well under $40
- + Quick Lock and Release makes the TV easy to attach
- + Enormous install base, so real-world guidance is easy to find
Cons
- − About 8 degrees of tilt is shallow — this is a glare-reduction tilt, not a true fireplace tilt
- − No cable management at all
- − Mounting Dream has no reachable manufacturer website — their domain serves an expired certificate and the alternate fails DNS entirely, so specs cannot be validated at source
- − Reviewers note it effectively takes three people to remove once installed
- − The advertised screen size range has been revised repeatedly on an unchanged listing
Mounting Dream MD2268-LK Tilting Mount review: what the specs say
The slimmest tilting mount here at 1.5 inches — but only 8 degrees of tilt. At $34.77, Mounting Dream's 2014 model sits among the cheapest we cover — the TV Mounts we compare run from $27.99 to $429.99. It scores 6.8/10 overall, calculated from published specifications across 8 categories rather than from a subjective impression.
Its strongest showing is Low Profile at 9.0/10 — how close to the wall the TV sits when flush. The weakest is Cable Management at 2.0/10, which is the trade-off to weigh before buying: if that is the specification you care about most, one of the alternatives below will serve you better.
Worth knowing before you buy: about 8 degrees of tilt is shallow — this is a glare-reduction tilt, not a true fireplace tilt; and no cable management at all. Every specification on this page comes from Mounting Dream's own documentation or a verified retail listing — where a figure is not published, the table says so rather than estimating it.
Specifications and price last verified . Report an error
Full Specifications
| Mount Type | Tilting |
| Screen Size Range | 37-90 inches on the current listing, though earlier revisions of the same listing read 37-70, 37-75 and 37-82 inches |
| Max Weight Capacity | 132 lbs |
| Max VESA Pattern | 600x400 |
| Tilt Range | About 8 degrees, measured on a variant SKU by a reputable outlet — shallow, and better for glare reduction than for above-fireplace use |
| Swivel Range | None |
| Extension from Wall | Not applicable |
| Profile Depth | About 1.5 inches |
| Stud Spacing | 16, 18 and 24-inch studs |
| Post-Install Levelling | Not published by the manufacturer |
| Cable Management | None — no cable management is provided |
| Connectivity | 16, 18 and 24-inch studs |
| Material | Powder-coated steel |
| Warranty | 12 months |
Compare Mounting Dream MD2268-LK Tilting Mount With
Cheaper Alternative
PERLESMITH PSLLK1 Fixed Low-Profile Mount — $27.99
Premium Alternative
ECHOGEAR EGLT1 Tilting Mount — $36.99