TV Mounts / ECHOGEAR
ECHOGEAR EGLT1 Tilting Mount
A full 15 degrees of tilt, UL certified — the above-fireplace budget pick.
Overall score 7.4/10
Pros
- + 15 degrees of tilt is enough for genuine above-fireplace use, unlike shallower rivals
- + UL certified with public documentation and load testing to four times its rating
- + Tilting forward for port access solves the main annoyance of a flush mount
- + Hardware arrives pre-divided by TV type, which speeds up installation
Cons
- − ECHOGEAR publishes no numeric VESA maximum, which is a real gap when you are checking fit
- − Concrete installations need hardware bought separately
- − No post-install height adjustment
- − No cable management raceway
ECHOGEAR EGLT1 Tilting Mount review: what the specs say
A full 15 degrees of tilt, UL certified — the above-fireplace budget pick. At $36.99, ECHOGEAR's 2015 model sits in the middle of the range — the TV Mounts we compare run from $27.99 to $429.99. It scores 7.4/10 overall, calculated from published specifications across 8 categories rather than from a subjective impression.
Its strongest showing is Value at 9.0/10 — capability and build relative to price. The weakest is Cable Management at 4.5/10, which is the trade-off to weigh before buying: if that is the specification you care about most, one of the alternatives below will serve you better.
Worth knowing before you buy: ECHOGEAR publishes no numeric VESA maximum, which is a real gap when you are checking fit; and concrete installations need hardware bought separately. Every specification on this page comes from ECHOGEAR's own documentation or a verified retail listing — where a figure is not published, the table says so rather than estimating it.
Specifications and price last verified . Report an error
Full Specifications
| Mount Type | Tilting |
| Screen Size Range | 32-75 inches |
| Max Weight Capacity | 125 lbs |
| Max VESA Pattern | ECHOGEAR publishes only that it accommodates almost all VESA patterns, with no numeric maximum — do not assume 600x400 |
| Tilt Range | 15 degrees downward |
| Swivel Range | None |
| Extension from Wall | Not applicable |
| Profile Depth | 2.5 inches |
| Stud Spacing | 16 or 24-inch wood studs |
| Post-Install Levelling | Not published by the manufacturer |
| Cable Management | No dedicated system; the mount tilts up for cable and port access |
| Connectivity | 16 or 24-inch wood studs |
| Material | Powder-coated steel |
| Warranty | 12 months |
Compare ECHOGEAR EGLT1 Tilting Mount With
Cheaper Alternative
ECHOGEAR EGLL2 Low Profile Fixed Mount — $34.99
Premium Alternative
ECHOGEAR EGLF2 MaxMotion Full Motion Mount — $114.99